Hello All,
I am trying to get my ASUS RT-N66U router with latest Shibby on two networks (one network with Lan br0, br1, br2 and Wireless eth1 and eth2) and a second network with (br3 and virtual wireless wl0.1 and wl1.1). My main network is working on all the lan ports and the two wireless for 192.168.0.110-150 with DHCP. However, my second network is broadcasting the virtual wireless networks. However, when I connect to them, I don't get any DHCP. when i try Static, it also has no internet access.
i see some other tabs which i have not configured yet as i not sure if its needed. (Advance -> Routing)
Logs:
Dec 31 20:00:10 RogersRouter daemon.warn dnsmasq[538]: warning: interface br3 does not currently exist
Dec 31 20:00:10 RogersRouter daemon.info dnsmasq-dhcp[538]: DHCP, IP range 192.168.1.110 -- 192.168.1.150, lease time 1d
Dec 31 20:00:11 RogersRouter daemon.err httpd[540]: bind: [192.168.1.1]:80: Cannot assign requested address
Dec 31 20:00:17 RogersRouter daemon.warn dnsmasq[715]: warning: interface br3 does not currently exist
Dec 31 20:00:17 RogersRouter daemon.info dnsmasq-dhcp[715]: DHCP, IP range 192.168.1.110 -- 192.168.1.150, lease time 1d
Aug 20 20:58:27 RogersRouter daemon.err httpd[1068]: bind: [192.168.1.1]:80: Cannot assign requested address
Aug 20 21:01:44 RogersRouter daemon.warn dnsmasq[1174]: warning: interface br3 does not currently exist
Aug 20 21:01:44 RogersRouter daemon.info dnsmasq-dhcp[1174]: DHCP, IP range 192.168.1.110 -- 192.168.1.150, lease time 1d
Here is what i have setup
Basic -> Network -> Lan
Bridge STP IP Address Netmask DHCP IP Range (first/last) Lease Time (mins)
br0 Disabled 192.168.0.1 255.255.255.0 Enabled 192.168.0.110 - 150 1440
br3 Disabled 192.168.1.1 255.255.255.0 Enabled 192.168.1.110 - 150 1440
Advance -> VLAN
VLAN VID Port 1 Port 2 Port 3 Port 4 WAN Port Tagged Default Bridge
1 33 Yes Yes Yes * LAN (br0)
2 34
3 35 Yes On WAN
4 36 Yes LAN3 (br3)
Advance -> Wireless
Bridge eth1 to LAN(br0)
Bridge eth2 to LAN(br0)
Bridge wl0.1 to LAN(br3)
Bridge wl1.1 to LAN(br3)
Advance -> Virtual Wireless
Interface Enabled SSID Mode Bridge
eth1 (wl0) Yes 46duffus Access Point LAN (br0)
eth2 (wl1) Yes 46duffus5G Access Point LAN (br0)
wl0.1 Yes Guest4G Access Point LAN3 (br3)
wl1.1 Yes Guest5G Access Point LAN3 (br3)
Advance -> Routing (currently default)
Current Routing Table
Destination Gateway / Next Hop Subnet Mask Metric Interface
142.167.248.1 * 255.255.255.255 0 vlan35 (WAN)
192.168.0.0 * 255.255.255.0 0 br0 (LAN)
142.167.248.0 * 255.255.252.0 0 vlan35 (WAN)
127.0.0.0 * 255.0.0.0 0 lo
default 142.167.248.1 0.0.0.0 0 vlan35 (WAN)
Advance -> Lan Access (currently default)
Nothing by default
Asus RT-N66U
Broadcom BCM5300 chip rev 1 pkg 0
Tomato Firmware 1.28.0000 MIPSR2-121 K26 USB AIO-64K