Yesterday i received a belkin router, was messing around with it; i managed to install tomato(toastman) but it didn't had the options for the usb port so i tried to install from the gui another file from the tomatousb page (kernel 2.4 ext)… The flashing was ok according to the upgrade page… but now the router doesn't show any wifi, i had tried to press the reset button and plug the router, but i can't access to the recovery page that i used the first time to flash the toastman build… Also tried the 30-30-30 and setting the ip to 192.168.2.1
The router starts, show lights, but it doesn't have wifi, and when connected to the ethernet port the pc show the conection as unidentified.
Tried a bunch of ip's including the ones that you suggested, but didn't work… Also tried holding the reset+wps button… Even tried different browsers and conecting the wire to the wan and other ports.
But i found out that when i put the ip to 192.168.2.1 windows warns me about a device with the same ip in the network…
Also i started wireshark and saw something like "who has 192.168.1.1? tell 192.168.1.111" so i put the ip on 192.168.1.1, and checked again wireshark, but this time said "Who has 192.168.1.1? Tell 0.0.0.0"
Any ideas of what to do next?
Fixed!!! using the method of post #5!!!: http:++++//www.++++linksysinfo.+++org/index.php?threads/problems-after-flashing-belkin-f7d8302-brick.70090/#post-246599
(remove the +++ from the link)