TomatoUSB

I downloaded the firmware tomato-RT-AC68U_RT-AC6x—118-AIO-64K for ASUS RT-AC68U AC1900 on shibby tomato website.

Then I went to asus homesite and downlaoded the utility for RT-AC68U.

After that I put the router on recovery mod and went to my internet protocol version 4 and changed the DHCP settings to:

Ip-address: 192.168.1.10
netmask: 255.255.255.0
Standard-gateway: 192.168.1.1

After that I flashed the router it says it cant connect to the router on the utility software.

Now I'm stuck and cannot connect to my router. Everything I refresh the webb browser 192.168.1.1 and I can see the tomato symbol on the browser but I cannot connect to the admin interface.

Update 1: Now I tried once again flashing the router without editng the DHCP settings and it all flashed up properly and the status on the utility was Successfully recovered file system. Please wait for the system to reboot. But nothing happends…..

Please help, please. Anyone ? :( I can't connect to the admin, user + login doesn't appear. It says it cannot connect on the browser but I still see the tomato symbol at the left side of http.

I found out a solution.

I downloaded latest firmwire from asus and flashed it using utility program. After that when the latest version was installed I could flash tomato shibby on my asus router. Once I've finnished the flash, I turned of the router and pressed + hold the WPS button, at the same time I click on the power button and KEEP holding the WPS button for 30 seconds.

Nvram the router and it worked perfect. :D

Update:

QOS is currently not working properly in this build.

QOS is currently not working properly in this build.

It is unlikely that you broke all Tomato QOS on all routers for everybody. Maybe you should post some config info and your expectations so we can help you fix yours.

Could you please tell me step by step what you need from me? qos is not working for my tomato version by Shibby RT-AC68U

Step 1 : Describe the computers and devices using your internet.

Step 2 : Tell us what kind of traffic you want to give high priority and what traffic you do not want to get priority.

Step 3 : Which computers / devices need priority traffic and which do not ?

Step 1: Got a PC called Gameserver that host servers. This server is PRIO 1 and it uses port as you can see below, those ports are high priority. After that the same server also got FTP + UGCC so I want those part with those specific part be on PRIO 2. Prio 3 is an extended NAS server and has lower priority.

Match Rule                                                   Class     Description    #
TCP/UDP
Port: 25595,8098-8100,25560-25571,25585-25590,27010-27115    Prio_1    GameServer                1
TCP/UDP
Port: 45402-45602,1003,170                                   Prio_2    GameServer = FTP - UGCC    2
TCP/UDP
Port: 80,6000,5000-5001                                      Prio_3    OagDataCenter + WWW        3

But when I look at graphs on qos, I dont see any connections and once I notice something I check att "class" and it says "unclassified". So the QOS does not work properly with the new version for RT-AC68U. Buy the way, I was experimenting my gaming computer PC and everything I changed the speed it did not work, earlier tomato version works perfectly but not this one. :(

The version im currently using for RT-AC68U is tomato-RT-AC68U_RT-AC6x—118-AIO-64K by SHIBBY.

118 for RT-AC68U is still very much a work in progress, as I understand it. For me the QoS classification does not seem to work. So you may be right. Shibby is active on linksysinfo and openlinksys.

Shibby is active on linksysinfo and openlinksys. What does that mean? That his currently working on resolving the problem? Is there any way of contacting shibby?

Links, I cannot post links. Google it - and you can contact Shibby.