TomatoUSB

I have a router with 8 Mb/ 64 Mb memory, and 1 USB port.
Want to use it as an Internet Radio Player , running "mpd", so I need "optware" installed.
The USB port will be used by a "USB to Audio" adapter, so "optware has to go into "jffs"
Currently have official 1.28 TomatoUSB USB EXT installed, leaving 1,408 kb free for jffs

My questions are:
1) What is the minimum size jffs needed to install optware ?
2) Which official or modded (toastman/shibby) version would leave the maximum amount for jffs with USB/OPTWARE

Thanks

That's really not a lot of space to play with. I'm not sure how much your particular setup will take, but I'm inclined to say that even all 8mb wouldn't be enough. You should just get a USB hub (preferably one with it's own power supply), and then you can plug in both a flash drive and your usb audio device.

thanks for your reply
forget to mention , that also needed some extra space for a swap partition
the hub seems like a good idea
any advise about how to activate hub, and setup, mount, format , etc… the 2 usb devices on the hub ?

The router should see the devices through the hub as if they were plugged right in to it.
I usually reference the following thread when I need to format my drive on the router.
http://www.linksysinfo.org/index.php?threads/creating-ext3-swap-partitions-on-tomato.48655/

thanks for all the info