Is there a wiki or some detailed instructions for getting Wireless Client working?
I'm pretty techie. I have a new RT-N66u. I put Tomato on it last week.
I connected to an OpenVPN server … awesome.
I thought that would be tricky. Naah.
Now I want to connect to an Access Point as a Wifi client so I can provide internet to several devices. No luck.
Here's what I did. Is there a step I am missing?
Admin » Config » Restore Default Configuration (normal)
Basic » Network » LAN » edit br0 to eliminate WRT54G IP conflict.
Bridge STP IP Address Netmask DHCP IP Range (first/last) Lease Time (mins)
br0 Disabled 192.168.222.1 255.255.255.0 Enabled 192.168.222.2 - 51 1440
Wireless (2.4 GHz / eth1)
Enable Wireless
MAC Address AC:22:0B:::B0
Wireless Mode B/G Mixed
SSID joeyc
Security Disabled (the AP has no password)
The PC can view the Tomato RT-N66u web page, but nothing else.
Some posts said I need to disable WAN and DHCP, but it doesn't seem to let me do that. I googled for answers, but didn't find any.
Under Status»Overview
Connection Type DHCP
IP Address 0.0.0.0
Previous WAN IP
Subnet Mask 0.0.0.0
Gateway 0.0.0.0
IPv6 Address
DNS
MTU 1500
Status Renewing…
Connection Uptime -
Remaining Lease Time
There should be an IP in here right?
I've tried several APs, and no luck.
What am I missing?
What can I check?
thank you