Hopefully someone can help me,
flashed my RT-N66U asus with tomato, pretty cool i must say, default firmware wouldnt allow me to use wirless client or ap mode.
so here's what i am trying to achieve, just for the sake that i might not even be on the right track.
i have a dlink router (DSL2750U), unfortunately cannot be flashed with tomato, however it does allow, bridged and access point mode as well. this is my primary router which connects to the internet.
i would like to have the asus in another room, with devices connected to it as well, wirelessly and cable, and have access to the internet through the primary router.
so far i have successfully connected the client to the dlink router, and the devices connected to the asus via cable have internet, the primary router assigns the secondary router a new ip, different from the static one that i have set. i.e. primary router is 192.168.1.2 and client is 192.168.1.1 but gets assigned 192.168.1.3. from a pc connect to the client via cable i can get to router 2's interface and ping 192.168.1.1, i can ping 192.168.1.2 from the routers interface but not from the pc, i would like to be able to connect to both via wireless and be able to connect to the devices connected to both routers.
when i connect wirelessly, i can see 192.168.1.2, but have no access to 192.168.1.1 or any devices connected to it. is it a routing issue, or a setup issue i have?
if i connect a pc to the client router DHCP is turned off, and router 1 doesnt assign it an ip.