So here's an odd one:
I recently setup Tomato Firmware 1.28.0000 MIPSR2-112 K26 USB AIO-64K, had one issue with port forwarding and got that resolved.
Now, I have one other weird issue.
I have a Roku 2, which is wired to a wireless bridge which connects to the router.
If I leave it's IP alone, and allow DHCP, it works as expected. However, as soon as I assign a static IP via MAC address, suddenly it cannot connect to the internet.
It connects to the network, gets and IP, but cannot connect to the actual internet (it fails on the 3 test when first validating a new network connection).
Can anybody make any suggestions or idea's as to why a STATIC IP fails, but DHCP works as expected. Just to clarify, the static IP is in the same exact subnet as the dhcp address (same subnet, same general IP range, and same gateway information). Also, other devices that are wired into the Wireless Bridge have assigned static IP's work with no issues and can connect to the internet, and be reached from the internet as well (via port forwarding).
Any help is appreciated.