Can't admin page access double routers ?
1.ADSL modem (Bridge Mode)
2.Router#1 (Router Normal (WAN 1 port / LAN 4 ports))
WAN connect to Bridge modem PPPoE / Static LAN1-4 192.168.2.X
3.Router#2 (Router Tomato firmware (WAN 1 port / LAN 4 ports)) Access admin page in LAN with IP 192.168.3.1 , Transmission 192.168.3.1:9091 it's OK.
WAN connect from LAN Router#1 fixIP 192.168.2.2
PC connect LAN / DHCP 192.168.3.2
After setup connect PC to Router#1/Router#2 can access internet normally.
Forward port 3389 Remote Desktop to PC connect with router#2 it's work!. (by method forward port 3389 at Router#1 to 192.168.2.2 Router#2 and then forward port 3389 at Router#2 to 192.168.3.2 PC )
From tomato admin page enable
Local Access HTTP 80
Remote Access HTTP 8080
Transmission 9091 allow remote access
R1 forward port 8080,9091 to 192.168.2.2
R2 forward port 8080,9091 to 192.168.3.1
R2 forward port 8080,9091 to 127.0.0.1(try again but it's not work)
I try to forward port solution same as remote desktop before but it is not work both WebAdmin tomato and Transmission.
Any config is wrong ? Please help me.