TomatoUSB

I am running the latest 107 Shibby release on my e3200 router. Prior to running Tomato, I was using the stock firmware. Using inSSIDer I noticed my 5GHz broadcast would stop and the only fix was to reboot the router. Fast forward to today and I'm now running Tomato, but having the same issue. I'm using the stock wireless settings from the firmware except that I have the channels hardcoded, 40MHz support, and the same SSID for both 2.4 and 5. I did do the 30-30-30 and clear nvram after the upgrade. Thoughts?

Sounds like a hardware issue…

I thought so too except I've seen other people reporting the same issue. Their fix was to drop it down to 20 MHz. I thought maybe a switch in firmware would have help?!? Here is the other thread:
community.linksysDOTcom/t5/Social-Media-Support/E3200-Drops-Wireless-Signal-every-now-and-then/m-p/402447

Bump.

My 5ghz also drops after some time . Disabling/enabling bring it back to life .. for some time .
I'm running latest shibby 1.12 .

Would like to know why this is happening , or see a fix for it .

No

linksysinfo dot org site is where shibby is posting sdtuff, not here.