TomatoUSB

Hey shibby so i was running your tomato-K26USB-1.28.RT-MIPSR2-101-AIO.trx on my asus rt-n16 fine for a couple of months i decided to update to the 104. i updated as i normally do erase nvram just for good measure. But thats when the weird stuff started happening upon rebooting the router was handing out randomly 69.xxx.xxx.xxx addresses.

i finally got access to the webui by plugging in power to router while ethernet is conntected from lan port 1 on router to my pc….router assigns random 69.xxx.xxx.xxx address i plug ethernet into lan port too and voila gives me a 192.168.1.XXX adress and i can get to the web ui.

whats wrong with the 104 AIO build?

Yup shibby something defiantly buggy with your 102 /104 firmware. If i flash back to vanilla tomato usb or 101 AIO everything works perfectly again.

If you need me to do anything to trouble shoot let me know.

Same problem here, just started testing shibby, version 104 very buggy, as when you reboot router , sometimes router reloads constantly till wireless access in enabled (maybe 15 20 minutes to access router).

Another issue is that with Sony Bravia ex700 TV, wireless adapter uwa-br100 is not working fine with shibby distribution, I will test it with asus stock firmware or toastman (I didn't test it yet) I realized today that TV wifi connection was not working. I received my asus rt-n16 router 4 days ago.

yeah i experienced same rebooting also

try version 101 i flashed back and its working wonderfully again

Hi guys, what speed can u get with 101? I can only get about 100mbit on wan port with 102 and 104. I have 200mbit from ISP and want to use full speed. with netgear firmware I can get 200mbit.

Im using 102 AIO on my RT-N16 & its been rock stable. didnt bother with 104 as it added next to nothing.
although i do have some bug fix requests if shibby should read this one day. (PLEASE SHIBBY!!!!!!!)

I have had to switch the private & public Virtual Wireless because enabling "AP Isolation" only isolates eth0 & i needed wl0.1 isolation.
I have nocatsplash enabled & works great blocking br0 (since vwlan's are switched) but after changing & saving some other settings in the router it gets disabled & i have to reboot the router to capture webpages again…. this is an issue because…

Using Web Usage Monitoring is a FANTASTIC idea, but its useless for me…. the problem is if i enable it it will only log activity from the second subnet (br1) being my private network (192.168.0.100-200) & not the public network (br0)(10.0.0.100-200)…. but if i change the settings to only monitor 10.0.0.0/24 then it does monitor the public network & not the private (exactly what i want), but nocatsplash's captive portal has been disabled by changing settings (not what i want!!!)… so i reboot the router & now nocatsplash does capture & redirect but web usage monitoring is empty & records nothing… the only way to start recording is to enter web usage config & save (even with no changes). which inevitably disables nocatsplash again!!!

How frustrating…. these fantastic features sitting there teasing me with the functionality thats just out of my reach!!!!

for the record i wanted web usage stats for the public network so i can decide when someone is breaking the "terms of use".

lastly, bandwidth upload limiter does not seem to be being honored. (possibly only br0/br1, cant remember)

forgot 1 more thing…..

i have enabled samba file sharing & it works great except for the fact that it is only broadcasting to br0 (Router address 10.0.0.1)
thats not a deal breaker as my firewall rules doesnt allow the public network to access router services.

the problem is the share doesnt appear for people in the private br1 network (Router address 192.168.0.1)
but it can be accessed by going to \\10.0.0.1
i need an option to either automatically or manually broadcast to all bridges/subnets or manual selection of broadcast locations.

otherwise, does anyone know any settings i can put in place to rebroadcast on the right subnet??
THANKS SHIBBY FOR UR TIME & SUPPORT!!!

Tomato Firmware 1.28.0000 MIPSR1-104 K26 USB AIO

insmod /opt/camera/input-core.ko
insmod: can't insert '/opt/camera/input-core.ko': invalid module format

folks i tested v140 on:
- Asus WL500gp (K26 R1)
- Asus RT-N15U (RT-N R2)
- Asus RT-N66u (RT-N R2-64k)
- Netgear WNR3500L v2 (RT-N R2)

and i didnt see any of your issues. I can`t reproduce your problems :/

v102 may was a buggy because i merged tomato-rt branch with my (a lot of commits) but in 104 i was revert all changes.I using v104 at the moment on RT-N66u and RT-N15U (Anon enabled on both) and i dont see any of problems.

Please try install OFW first, reset all settings to default and install tomato v104 one more time via restoration mode.

Hello Shibby, you are doing some excellent work on this firmware. I have just updated my Asus WL500gP from Tomato 1.25 to your latest 1.28 version 104. I am using the tomato-K26-1.28.RT-MIPSR1-104-Max firmware. I think everything is working (haven't checked everything) but I have noticed that the Web Usage only tracks the usage on the wired network and not the wireless network.

Is there something broken in the Web Usage?

Thanks