Has anyone been successful in getting a 3g connection with Verizon and if so could you please share your 3g modem settings.
Shibby FW has one verizon model
2027 #######################################################
2028 # Pantech / UTStarcom UMW190 (Verizon)
2029 #
2030 # Contributor: Noel J. Bergman, Gus Esquivel
2031
2032 DefaultVendor= 0x106c
2033 DefaultProduct=0x3b05
2034
2035 TargetVendor= 0x106c
2036 TargetProduct= 0x3716
2037
2038 MessageContent="555342431234567824000000800008ff020000000000000000000000000000"
2039
I have a USB760 so how does the above help me? I do know that mine is suppose to be supported
700 ########################################################
701 # Novatel U760 USB modem
702 #
703 # Contributor: Richard Laager
704
705 DefaultVendor= 0x1410
706 DefaultProduct= 0x5030
707
708 TargetVendor= 0x1410
709 TargetProduct= 0x6000
710
711 MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
712 NeedResponse=1
713
Shibby FW supported your router.
700 ########################################################
701 # Novatel U760 USB modem
702 #
703 # Contributor: Richard Laager
704
705 DefaultVendor= 0x1410
706 DefaultProduct= 0x5030
707
708 TargetVendor= 0x1410
709 TargetProduct= 0x6000
710
711 MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
712 NeedResponse=1
713
after modem detection. Set your setting under Basic->Network. Contact Verizon for modem init string and APN needed or google for info.
what dial input you mean? under basic->newtwork, once you set up wan type to 3G modem, dialup properties will appear below.
This is all I get under 3g Modem:
Type
Modem device
PIN Code
Modem init string
APN
Username
Password
Connect Mode
Check Interval (seconds)
MTU
Single Line MLPPP
Bridge WAN port to primary LAN (br0)
what else do you need? for my huawei E353, I only need the modem init string and APN. Post here what is missing and hopefully shibby will make modification on his next build.
For the meantime, I suggest that you buy another 3G modem, mine is 4G (21Mbps) and I'm planning to get another that support 5G, up to 100mbps.
Enter that in "modem init string". Take note, you also need to enter correct APN. After done configuring, click save. Go to Status->Overview, there you have option to disconnect/reconnect