I've recently set up an ASUS RT-N16 with the latest shibby build (Tomato Firmware 1.28.0000 MIPSR2-101 K26 USB AIO)
My need was twofold: 3 seperate VLANs and per IP WAN usage (bandwidth) monitoring.
While I thought I achieved all of that pretty easily via the UI, the per IP bandwidth seems to be causing me problems.
The Bandwidth Usage adds up nicely with what my ISP notes as daily usage. (About 8gb in the last 4 days)
The IP Traffic however is wildly different - about 60GB over the same period.
Do I misunderstand IP traffic? Is that ALL IP Traffic, LAN and WAN?
A bug in more recent builds? A bug related to multiple VLANs?
A bit more info on the setup:
The VLANs are:
VLAN1: Port 1 & 2 => LAN (Br0)
VLAN3: Port 3 => LAN1 (Br1)
VLAN4: Port 4 => LAN2 (Br2)
Wireless (Eth1) => Br0
Bridge STP IP Address Netmask DHCP IP Range (first/last)
br0 Disabled 192.168.1.1 255.255.255.0 Enabled 192.168.1.2 - 51
br1 Disabled 192.168.2.1 255.255.255.0 Enabled 192.168.2.2 - 254
br2 Disabled 192.168.3.1 255.255.255.0 Enabled 192.168.3.2 - 254
FWIW, Ports 1 & 2 connect directly to PCs, while 3 & 4 both go off to WAPs.
Bandwidth limiter is on (and working well) for both br1 and br2
Was delighted when I discovered a means to do what I needed with Tomato, but I'm rather screwed without the per-IP (or at least per subnet) bandwidth consumption…