I have set up VPN tunneling on my E2000, and I am using a laptop to connect with OpenVPN.
I am able to use the laptop to ping one of my computer inside my network, but not vice versa.
I have read many articles/threads on issues between a client and server router, but not a client computer.
I have tried client-specific options and tried to include just the common name of the client, and left the subnet and netmask blank, but no luck.
In the status tab of VPN, I see this:
Routing Table
Virtual Address Common Name Real Address Last Ref
10.8.0.6 Dell XX.XX.XXX.XXX:2714 Fri Oct 5 12:00:39 2012
Am I missing something?
Start with WAN: Checked
Interface Type: TUN
Protocol: TCP
Port: 1194
Firewall: Automatic
Authorization mode: TLS
Extra HMAC authorization (tls-auth): Disabled
VPN subnet/netmask: 10.8.0.0/255.255.252.0
Poll Interval: 0
Push LAN to clients: Checked
Direct clients to
redirect Internet traffic: Unchecked
Respond to DNS: Checked
Advertise DNS to clients: Checked
Encryption cipher: AES-128-CBC
Compression: Adaptive
Manage Client-Specific Options: Checked
Allow Client<->Client: Checked
Allow Only These Clients: Unchecked
Current Routing Table
Destination Gateway Subnet Mask Metric Interface
XX.XX.XX.X * 255.255.255.255 0 vlan2 (WAN)
10.8.0.2 * 255.255.255.255 0 tun21
192.168.1.0 * 255.255.255.0 0 br0 (LAN)
XX.XX.XX.0 * 255.255.254.0 0 vlan2 (WAN)
10.8.0.0 10.8.0.2 255.255.252.0 0 tun21
127.0.0.0 * 255.0.0.0 0 lo
default XX.XX.XX.X 0.0.0.0 0 vlan2 (WAN)