Hi all,
I've configured my Tomato rt-n16 as an AP behind my openwrt tl-wr1043nd which is configured with guest wifi through a guest Vlan ( VID 3) and subnet 10.10.10.0 subnet
I want to extend my wifi guest to the rt-n16.
I've already setup br1 and assign it to the same Vlan 3 as the 1043.
i can ping my rt-n16 from the 1043 but not the 1043 from the rt-n16.
I believe the default route is to blame - as vlan 1 - subnet 10.1.1.0 and def gw 10.1.1.1
my routing table is:
root@Mau-s:/tmp/home/root# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
10.10.10.0 0.0.0.0 255.255.255.0 U 0 0 0 br1
10.1.1.0 0.0.0.0 255.255.255.0 U 0 0 0 br0
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
0.0.0.0 10.1.1.1 0.0.0.0 UG 0 0 0 br0
how can i route 10.10.10.0 to openwrt vlan 3 gw 10.10.10.1 at router startup?
I also want all devices connected to this vlan3 guest wifi to get ip from openwrt through vlan3.
thanks for any suggestion !
Asus RT-N16 Tomato Shibby build5x-101V
TP-Link TL-WR1043ND v1.8 - Openwrt 12.09beta
TP-Link TL-WR703n v1.2 - Openwrt Attitude Ajustement
Asus WL-500gP v1 - wl500g.googlecode.com rtn-r3702