Hello, I am new and flashed me Linksys E3000 with toastman (/tomato-E3000-NVRAM60K-12875002). Everything was working fine until my devices were rebooted and now the device does not connect to the internet. Wireless and even wired connection to the router do not enable me to access the web UI via 192.168.1.1. I have tried :80 etc to no avail. I can view the wireless network 'wireless' but cannot connect to the internet. I have attempted to reset the router as well. Help?
Date: 22 Jul 2012 18:07
Number of posts: 10
RSS: New posts
Try to set static ip:
DHCP is off by deffault.
thanks, how can I go about doing this?
I know DHCP is disabled by default with Toastman, but I recall changing some setting from '0.0.0.0' which has DHCP off to '0.0.0.1'. I'm a noob at this stuff.
The problem is that I cannot get the web UI up to make any changes though…
I don't know what I thought the issue was with the WAN dhcp… Try entering 192.168.1.1 in the browser to bring up the web UI. Under LAN enter a range 192.168.1.100 - 192.168.1.150 and click add(then save), this should give you DHCP so you won't have to use static settings in your NIC settings.
192.168.1.1 does nothing. I had been using the web UI but for some reason it no longer works. I can see the network from my devices but connection does not give me internet ability or the ability to use the UI. Wired to the router is the same.
I used ipconfig and here is what I get
Wireless LAN adapter Wireless Network Connection 2:
Connection-specific DNS Suffix . :
Link-local IPv6 Address … . . : fe80::5569:e0a0:84e6:d910%19
Autoconfiguration IPv4 Address. . : 169.254.217.16
Subnet Mask … … … . . : 255.255.0.0
Default Gateway … … … :
Solved: I am a noob and thought I had DHCP turned on when I didn't.
Set a static IP for my computer and was then able to login.