TomatoUSB

Hello,

I'm using Tomato Firmware v1.28.7495 MIPSR2-Toastman-VLAN-RT-BETA K26 USB VPN-NOCAT. I have an OpenVPN Server configured and can connect to the VPN from two different devices outside the network. Once connected I have no internet connectivity nor can I access the share I have configured.

When connected from an Ubuntu desktop I can see tun0 (10.8.0.6) as a network interface. No packets are being recorded as flowing from here or from the router. I think either IPTABLES or IP routing is limiting me from sending VPN traffic over the LAN but I am unable to properly configure that portion. Any guidance or help would be appreciated. Unfortunately the tutorials here and at other various places don't address this issue.

Routing issue. Do TAP instead of tunnel or you will need to set the route for your tun0 interface

Thanks for the reply. I'd prefer to stick with TUN for security implications. How do I set my route for tun0?

In Custom Configuration I have:

keepalive 120 300
route 10.8.0.6 255.255.255.0

But this does not appear do anything. Does this need to be changed or should I be routing differently?

In custom config use "verb 3" and post the log from OpneVPN.

Hi, it won't let me post the log because it says it contains links; which it doesn't…. Not sure what it's picking up and rejecting. I send you a private message MimikoMimiko.

Could we possibly open up this discussion again, since I'm having the same issue as above. I too am using tun but have no Internet connectivity or access to other clients on the LAN at home. I can however access the router at its remote LAN address (192.168.1.1).

I would love to have this discussion open again since I have the same problem and there is not open answer to the solution.

Thanks!!