TomatoUSB

So I just recently got a E4200v1 with the intention to of using it to monitor and throttle usage of my network. Monitoring of usage is working wonderfully utilizing an attached usb drive for bw/iptraffic storage. However, enabling BW Limiting on even one client is causing the router to repeatedly crash until disabled. Is this a known issue, and are there any logs I should post to assist in this getting fixed?

Oh and the build I'm using is v1.28.0496 MIPSR2-Toastman-RT-N K26 USB Ext

Same here, I'm using:
Tomato Firmware v1.28.0501 MIPSR2Toastman-RT-N K26 USB VLAN-VPN-NOCAT

Does anyone have a solution ?

I have the same issue. Tomato Firmware v1.28.0501 MIPSR2Toastman-RT-N K26 USB Ext

can you test my mod and let me know is this problem also exist?

Best Regards.

i dont have an e4200 but my rt-n16 works fine with bw limiter alone or together with qos

Myers, do you do any scripting? to start the qos service with scripting you can use:
service start qos

Do you know if there is something similar for the bandwidth limiter?

Yes, BW limiter and other modules (Nocat, CTF) crash in the actual status of source code, we are working to establish a more 'clean' iptables rules. Unfortunately the code in Tomato began corrupted by many modifications without enough 'test'. I'll post when solved, we are on the way.
These issues appear very random in routers with low RAM (in comparison with tanks like Asus RT's).. like E3000, 4200 and also when VLAN feature splitted the nvram area for the 6 ports …
To stop rebooting and at least disable the feature provoking the issue disconnect WAN cable, then you can access the GUI and deactivate the 'reboot feature'.

Thanks for the comments.

Any news on this front? It's the one feature I'd love, over any other :)

No