TomatoUSB

Dear all,

After updating the K26USB-1.28.7493MIPSR2-Toastman-RT-VPN to Version 7495.2 or 7495.3, there is always an error message seen on the formwarding and QoS Page, showing an iptables restore failure.
Checking the error log, the line causing the error is always the final "COMMIT" (last line in the file).

Deleting all forwardings and QoS rules did not help to identify the problem, going back to build 7493 helped.

As i'm not sure if my forwards and QoS settings are working with the error condition, i went back to 7493.

BR
Marco

I've got the same error on Tomato Firmware v1.28.7632 -Toastman-IPT-ND ND VPN (on a wrtg54G V2.2) and could this be related to the fact that remote control is not possible (neither via HTTP or HTTPS)
Marco… did you also saw problems with remote control of your device ?

Many thanks (un the regular tamatousb builds remote access is working)

Hi there, my remote access is working now….
Because the problem should be related to the iptables, I thought an "iptable -F" to clear all the tables could help. So I started a telnet session and executed the command. I (hard) rebooted the router -i.e power off/on - and I checked the port forward section (the error message 'iptable-restore….' was gone) and everything seems to work now

As I encountered the same problem on my new E4200 router (V1) I'll try this out on it as well…. I'll report over here :-)

Hope I can help you and eventually some others

Problems solved on E4200 as well…. a iptables -F did it.

iptables -F

this fixed me after i changed the lan ip. iptables appeared identical before and after clearing them as viewed in gedit.

Netgear WNR3500L/U/v2: Tomato 1.28.7494 MIPSR2-Toastman-RT K26 USB Std

thanks dirk ^_^