What is needed to port TomatoUSB to the WNDR3400?
I second the notion!! =) Got a Wndr3400v1 currently running dd-wrt and I would love to be able to switch it over to Tomato.
Note: Only the v1 of this router is currently supported by dd-wrt and not the v2 so if you have a v1, then theoretically a Tomato port should be possible.
Thanks, Shibby! =)
The InfoDepot Wiki Page for the Wndr3400v1 has some nicely close up photos of the PCB. I can take close ups of mine if you need them.
I am not sure how to do the nvram dump. The closest command I can find in dd-wrt is "nvram show"? If that's not how to do it, let me know. I also have a usb-serial cable left over from an old WNR3500L that I used to have that I can hook up if needed.
Unfortunately, I cannot seem to get my usb serial cable to work while connected. It looks like I am not going to be much of any help unless I can figure out what is going on. =(