Flashed to 1.28.7490 MIPSR2-Toastman-RT K26 USB VPN this morning, computers running to the router with wires are working ok, but no wireless. My phone and laptop both pickup the router, but just goes to obtaining IP for a while then drops it all together and goes back and forth. Any ideas on what to do before I revert back to stock firmware, really looking to use the USB printer function so I would like to give this a shot if I can fix the wireless.
Date: 30 Nov 2011 14:58
Number of posts: 2
RSS: New posts
Did you enable DHCP? Toastman's mod has DHCP disabled by default, so you'll need to configure the IP address of one of your computers to something like 192.168.1.10, and access the router's web GUI at 192.168.1.1 to then enable and configure DHCP.
Also, did you erase NVRAM after the upgrade. This is usually quite important when going from stock firmware to tomato. It can be found under Administration -> Configuration. I suggest a thorough erase, and then configuring the router from there.