Hi all. I hate to ask but I'm having zero luck getting my USB attached drive mapped in Windows 7 64 bit since I've installed Tomato. Using the stock Asus firmware I would go into Computer, click on Map Network Drive and enter \\RT-N16\part0 Sometimes it worked just fine and sometimes it wouldn't. That's why I finally got up the nerve to flash the firmware. I'm tired of it being there then NOT being there.
Now I having zero luck getting it to work. Nothing I put in the dialogue box works at all. On the USB support page of the firmware I have USB 1.1 and 2.0 support enabled in the firmware, all the file systems (FAT, NTFS, etc) enabled, and Automount enabled. The drive shows as mounted on that page of the firmware.
Partition 'WD 1TB' fuseblk (931.51 GB / 294.76 GB free) is mounted on /tmp/mnt/WD_1TB
What do I need to put in the dialogue box or change in the firmware / Windows / etc to get this working full time? \\tomato doesn't work, \\RT-N16 doesn't work anymore… I'm totally lost… :-(
Thanks for your help in advance!