Hi i have a problem, I was running dd-wrt on my converted e2000 (previously wrt320n), then I installed tomato usb e200 beta, has been working fine for months, but I started having issues where the router would just stop responding and would require a reboot.
After trying a few things over the last week I decided to try one of the weekly builds so I chose tomato-E2000-NVRAM60K-1.28.9055MIPSR2-git-13042011-gcc-4.4.6-Std and flashed it onto the router.
Seemed to go just fine but now I can not access the web interface. I can ping, and telnet into the router. I checked the http_ and it's set to 1.
I tried using a TFTP flash utility found on dd-wrt forum and it seemed like it would write the new firmware. (I tried 2 versions of dd-wrt and my previous tomato firmware) but each time I finished and did a hard reset It was still the same weekly build and still no GUI.
I've tried everything I can think of but to no avail. The router is not bricked, pinging it gives me a response of 60, wireless works, and it works normal as a router. Telnet works, but no GUI and no clear way to revert back to a different firmware. Please help.
I should also note that I tried different browsers and cleared my cache as well