Hi, I am really new to flashing a router but thought that it look simple so I gave it a shot new out of box. Follow instruction here http://tomatousb.org/tut:installing-on-asus-rt-n16. But I think I unplug it too early after the hang at 33%. Then I did a few other method like pressing WPS button and plugging in power for 30 second or more to try to reset then wait a while before trying to reflash again. Now every time i press restore button and plug in power I would get power light blinking slowly in recovery mode, I proceed to upload K26-MIPSR2 after restarting computer. But after 99% loading, it'll say Fail to contact wireless device! please check the light signal to see if the system recovery is still in…The power light would blink slowly, but once the uploading process start the power light goes off like no power but the LAN port light is still on…My settings is
Firewall is OFF
TCP/IP is 192.168.1.2 and Subnet mask is 255.255.255.0 Default Gateway is blank
I cannot access the router address at all (192.168.1.1) so I cannot try the other method with ddwrt mini through router address.
Please help, I don't know what to do if I cannot flash it. Please Help, Thank you.