TomatoUSB

I'm using the lastest build, which is tomato-K26-1.28.9054MIPSR2-beta-Std, but the time on my router isn't available.
Could anyone tell me how to enable that option ? I need it to use schedule reboot on WRT320N.

It should be automatic, but the configurable options are under Basic/Time.

Rodney

Hi, Rodney. Thanks for your reply. I've tried that options already, but I still couldn't get the time, even I flashed a firmware again with all default settings. The time is always unavailable.
Let say, If I used WRT320N as an access point with WAN and DHCP disabled. Is it possible to get a time on my router ?

As long as the AP has internet connectivity (i.e. is routing through the WAN gateway), you should be able to get the time updated. All the router is doing is a simple NTP request to the target of your choice.

Rodney

configure your dns addresses on your network tab. The router is doing a simple NTP request by name, not by IP address. to prove or disprove this goto the tools tab and ping 0.pool.ntp.org. If that works your NTP lookup should work.

AP must be able to do DNS lookup, set route and DNS to your router.