TomatoUSB

I'm a bit confused about which build I should be using. I have a WRT54G 3.1, its running openwrt right now fine. I notice on the http://tomatousb.org/download page, there are three different possibilities. Two experimental, for MIPSR1 and MIPSR2 routers, how do I know if I have one of those? Then there is one stable build.

According to http://tomatousb.org/doc:build-features-cross-reference the VPN build 'e' is the one that I want, because I want openvpn and ipv6 support (although I dont have USB, so I would normally chose build 'v' but it doesn't have ipv6). However, looking at this thread http://tomatousb.org/forum/t-298363/ipv6-on-wrt54g-v2-and-v4 it was discussed just a few days ago and people were saying that there is no ipv6 support in the current release. Does that mean the current 'stable' release and the 'experimental' one does have it?

thanks for your guidance, I'm excited about using tomato again, I loved it before but stopped using it because it didn't have ipv6 or vpn support.

try one of this: http://firmware.mooo.com/Toastman%20Builds/MIPS32R1%20Kernel%202.4%20(WRT%20etc)%20Builds/Tomato-1.28.7617-%20ND%20-Toastman-K24%20MIPSR1%20builds/
it should have everything you need

What is this mooo.com firmware? Is it unrelated to this project? I'm a little hesitant to install firmware from a random source…

I can confirm the validity of Toasman's Tomato builds.

hmm, Toastman's builds aren't there anymore :(

The little flash drive I am using for the ftp site means I have to rotate stuff, and 7617 has disappeared. Use the http site http://toastman.dyndns.org/Toastman%20Builds/MIPS32R1%20Kernel%202.4%20%28WRT%20etc%29%20Builds/Tomato-1.28.7617-%20ND%20-Toastman-K24%20MIPSR1%20builds/

That site has pretty much everything on it, but it is occasionally offline if I compile something in Linux.

I decided to try and compile HEAD ast night, but failed, I was trying to do this:

make v MIPS32=r2r1 V2=mine OPENVPN=y BBEXTRAS=y BCM57=y NO_CIFS=y NO_ZEBRA=y NO_SAMBA=y IPV6SUPP=y USB="" EBTABLES=y

that failed on some EBTABLES issue, so I tried removing EBTABLES, but it still failed :(

Toastman: I have a hard time parsing the URL that you put in the forum above. It seems like the encoding is messed up with a lot of %20s in there…