Yesterday I flashed my Netgear WNR3500L from TomatoUSB-Ext Build 52 to TomatoUSB-VPN Build 54. I made two 30-30-30 resets and reconfigured manually my router. My Hurricane Electric IPv6 tunnel worked fine before (with Build 52) and now it will not with Build 54. I made a simple copy/paste of my previous "Wan Up" script and all works fine except if I add a route… Here is the code:
logger -t wan [Ouverture] TUN6="2001:db8:2:4::2/64" SUB1="2001:db8:3:4::1/64" killall radvd logger -t wan Tunnel ipv6... ip tunnel add hen6 mode sit remote 184.108.40.206 ttl 255 ip link set hen6 up ip addr add $TUN6 dev hen6 ip addr add $SUB1 dev br0 ip route add 2000::/3 dev hen6 metric 1 radvd -C /tmp/etc/radvd.conf logger -t wan [OK]
If the "ip route" line is commented, no reboot occurs but obviously, I can't come out and "play" on the IPv6 Internet :( I suspect the ip6t_ROUTE module to be somewhat wrecked or invalid but I have no evident clue to this. Any other idea ?
Thanks in advance.