I currently have a WRT310N V1, and would love to see it supported on tomato USB! I'd try flashing it, but id like to wait 1 month first as I have a USB to TTL adapter commin to read serial output.
I'm not sure that will be useful. Serial console goes to a UART. USB isn't a UART. The OS has to be up and operational for any output to go to the USB port. When I was looking into it, I came to the conclusion that I'd need a TTL-to-RS232 converter and would have to open the case and solder wires directly to the UART chip.
Of course, I might be wrong.
The USB to TTL adapter uses USB on the host, then has the 4 leads for a TTL connection, and it emulates a serial port on the PC. so it should work, as its not router driven, but PC driven.
OK, well I got my adapter, so I have a JTAG and TTL adapter. Now this is pointed at teddy_b, do you think you could be able to integrate this router?
Broadcom 4785 Chipset
4x 10/100/1GB LAN Ether Ports, 1x 10/100MB WAN Port
DD-WRT SVN's with there integration code for this unit:
http://svn.dd-wrt.com:8000/dd-wrt/changeset/9524 - Initial support?
http://svn.dd-wrt.com:8000/dd-wrt/changeset/9540 - GPIO
http://svn.dd-wrt.com:8000/dd-wrt/changeset/12516 - WPS Button
http://svn.dd-wrt.com:8000/dd-wrt/changeset/13522 - Later GPIO fix for LED colors?
Im willing to test builds, and risk a brick (thank god for the jtag) to help others out there who may have this router.