So, I have 2 asus routers with Tomato firmware. One is setup at 192.168.1.1 and is my primary lan router. I recently setup the second one 192.168.2.1 in hopes of routing some of my home devices through open vpn to torguard. I have managed to get the vpn router working fine with torguard. I have its wan port connecting to the lan and using 192.168.1.43 as its wan IP. When I connect to this router the traffic is routed to torguard and all is fine. I can also connect to the 192.168.1.1 router when I am assigned a .2 IP. My problem is going from .1 to .2. I am unable to see anything from .1 to .2. I am sure it is a routing table setting but am afraid to change anything without knowing for sure. My plan was to IP certain devices in the house to route through vpn all the time. Those devices are wired to the 192.168.1.1 lan. Was sure hoping I could get some advise from someone more knowledgeable. I appreciate it in advance….
Help setting up 2 tomato routers