TomatoUSB

Hi,

I'm flashed tomato by shibby. I have two linksys wrt320n routers and I want to use one of them only as switch and AP. I disabled WAN and bridged WAN port to LAN. When I log in using SSH the banner shows my WAN interface is still having an ip address in the range I use for my home network I don't see a lease with this ip number on my DHCP server and I'm not able to ping the adres.

How can I remove the adres from WAN?

Tomato v1.28.0000 MIPSR2-131 K26 MiniIPv6
========================================================
Welcome to the Linksys WRT320N [nwsw03]
Uptime: 20:29:05 up 1 min
Load average: 0.40, 0.15, 0.05
Mem usage: 27.2% (used 7.84 of 28.87 MB)
WAN : 192.168.10.185/24 @ 68:7F:74:04:C9:8F
LAN : 192.168.10.4/24 @ DHCP: -
WL0 : TEST @ channel: 11 @ 68:7F:74:04:C9:90
========================================================

problem is solved. Before configuring my wan port was connected to my home network so it got an DHCP address. After configuration it seems this address is stored somewhere and it shows up when logging in whith SSH. I restored the router do defaukt configuration and now confugured it with my home network disconnected. The wan IP is now 0.0.0.0 I think this is ok.