I have been trying to setup a guest wifi network for the first time on a WRT54GL router via Tomato Shibby FW V:1.28.0005.124 ND SD VPN. The main wifi works fine however none of the devices can connect to the guest wifi, after entering the passcode it gets stuck on connecting. I have tried flashing different Tomato firmwares all to no avail. Being my first post I am unable to upload image links so here is my setup:
Basic -Network under LAN
Bridge STP IP Address Netmask DHCP IP Range Lease Time
bro disabled 192.168.1.1 255.255.255.0 enabled 192.168.1.100-149 1440
br1 disabled 192.168.2.1 255.255.255.0 enabled 192.168.2.2-7 1440
Then under Advanced - VLAN (no tagging)
VLAN VID Port1 Port2 Port3 Port4 WAN Port Bridge
0 0 Yes Yes Yest Yes LAN (bro)
1 1 Yes WAN
2 2 LAN1(br1)
Then under Wireless
Bridge eth1 to LAN(bro)
Bridge wlo.1 to LAN1(br1)
I have setup the wlo.1 guest wireless to "enabled" MAC adress shows, "broadcast" is enabled WPA/WPA2 Personal for security, AES encryption. What could be wrong, I am puzzled.
Any help would be greatly appreciated.
Many thanks
