TomatoUSB

I have successfully configured OpenVPN Server on Tomato at another location and configured OpenVPN Client on Windows, connecting just fine to it.

Now I am trying to configure my home router running Tomato, so that the OpenVPN Client on my home router will connect to the OpenVPN Server to the remote location.

I made the configuration but when it's connected, nothing works annymore. I can't ping outside and I can't ping the remote network either.

Basically I need to replicate the settings from my Windows OpenVPN Client into my home router's Tomato OpenVPN Client. Seems like a straightforward job, but I can't get it done.

Any help would be greatly appreciated!

thanks in advance,
Marius

My Windows OpenVPN Client config (working fine)

remote mydynamicdomain.ddns.net 1194
client
ns-cert-type server
dev tap0
proto udp
resolv-retry infinite
nobind
persist-key
persist-tun
float
ca ca.crt
cert client.crt
key client.key
;verb 3
mute 20
allow-pull-fqdn
route www.mywebsite.com 255.255.255.255

My Tomato OpenVPN Client settings (not working)

Basic:
Start with WAN: Checked
Interface: TAP
Bridge TAP with: LAN (br0) *default
Protocol: UDP
Server Address/Port: mydynamicdomain.ddns.net 1194
Firewall: Automatic
Authorization Mode: TLS
Username/Password Authentication: un-checked
Extra HMAC Authorization: Disabled
Server is on the same subnet: checked

Advanced:
Poll Interval: 0
Redirect Internet traffic: disabled
Accept DNS configuration: Disabled
Encryption cipher: Use Default
Compression: Adaptive
TLS Renegotiation Time: -1
Connection retry: 30
Verify server certificate: un-checked
Custom configuration:
ns-cert-type server
allow-pull-fqdn
route www.mywebsite.com 255.255.255.255

Is anyone able to help with this please?

Anyone please??
I just need to translate those working Windows OpenVPN client settings into Tomato OpenVPN client settings…

thanks a lot,